The SAMATIC DC WIZARD
(worldwide Patents Pending)
This is our latest addition in 1999:
The UNIVERSAL Automatic DC and Transformers Form.
If you need to make DC coils a few times a year, or a few times a day, we have
the ULTIMATE solution for you. You will enjoy making these hard and time consuming coils, in a fraction
of the time, and you will pocket the profits. This head pays for itself in just a few coils. It
comes with a built -up software in the SAMATIC machine, and is very easy to use. We can also retrofit any
of our older machines to use the DC Wizard. Contact us for details.
The DC Wizard Head relieves your shop from the need to prepare DC forms for each new DC job.
The DC Wizard is a universal head, which means you can adjust it to any dimensions and immediately
start to work. It takes only 2 minutes to adjust the Head, and it takes about 8-10 minutes to complete a
2" by 8" perfect field coil with double tapering. In your current machine, this task may take 8 hours, including the build up of the proper forms.
SAMATIC DC Wizard in combination with the SAMATIC machine provides the following advantages no one else can give you:
- 1. Dimensions from 1" to 42". (figure A)
- 2. Automatic setup- no tooling are needed, no pegs. Just a flip of the switch.
- 3. Precision to 0.05".
- 4. 2 minutes to set up.
- 5. Automatic tapering- from left, from right, from both, or None.
You can reduce from 1 to 9 wires on each side as desired.
- 6. Machine works in "Jumping" mode or in "Smooth" mode or in the "RECTANGULAR/Square" mode when it layers.
- 7. Maximum Coil Weight- 800 Lbs !
- 8. Coil Take Off- is done by simple sliding. The Wizard remains in its setup, so there is no need to
set it up for the next same coil.
- 9. Wire sizes from AWG 2 to AWG 33
- 10. Coils are perfectly tensioned, layered and ready to use in minutes.
- 11. Rectangular/Square wires can be used.
- 12. Taperd coils are made so perfectly, that when removed from SAMATIC Wizard, they
stay in shape without varnishing! (see pictures).
BACK TO FIRST PAGE